Mechanical Double-Mold Tyre Shaping Curing Machine
Application
This machine is perfect for vulcanizing TBR, PCR tires of bias tires.
Structure Characteristics
This machine belongs B-type (Bad-O-Matic) side link double mould tire shaping and curing machine. It mainly consists of mainframe, center mechanism, manipulator, steam dome (or platen), segmental mould controller for radial tires and so on. Different configurations are possible. The machine will match with post curing inflator when curing the bias tires. And segmented mould controller will be matched if it cures the radial tires.
1.It adopts PLC control, which can realize PID adjusting.
2.The programmable terminal uses touch screen type tablet computer, which supports Chinese and can make relevant pictures to meet clients' requirements. In addition, various curing techniques and parameters can be stored by it.
3. Electrical components such as pipelines' valves, tablet computer, PLC all adopt internationally well-known brands.
Main Parameters of Mechanical Double-mould Tyre Shaping and Curing Press
| Model / Parameters | LL-B 1640×2 (65.5") | LL-B 1525×2 (63.5") | LL-B 1310×2 (55") | LL-B 1220×2 (48") | LL-B 1145×2 (45") | LL-B 1050×2 (42") |
| Steam Dome Specification | 1640mm | 1525mm | 1310mm | 1220mm | 1145mm | 1050mm |
| Max Mould Closing Force | 4450KN | 4220KN | 2890KN | 1920KN | 1720KN | 1320KN |
| Height of Mould | 254-635mm | 245-445 mm | 305-505 mm | 230-455 mm | 180-300 mm | |
| Power of Main Motor | 16KW | 13kw | 11kw | |||
| Apply Bead Specification | 19"-24.5" | 19"-24" | 16"-20" | 13"-20" | 12"-17.5" | 12"-16" |
Notes :
If it works for curing bias tires, the mechanical double-mould tyre shaping and curing press will match with post curing inflator.
If it works for curing radial tires, the mechanical double-mould tyre shaping and curing press will match with segmented mould controller .
Hydraulic Double-Mould Tire Shaping and Curing Press
B-Type Mechanical Horizontal-Moving Curing Press For OTR Tires